BPWNN - GACOFLEX H-22 SERIES
- MSDS: BPWNN
- Manufacturer: GACO WESTERN INC
- Product Name: GACOFLEX H-22 SERIES
- National Stock Number: 8030-00N034945
Product Identification
Product ID:GACOFLEX H-22 SERIES
MSDS Date:07/01/1990
FSC:8030
NIIN:00N034945
MSDS Number: BPWNN
Responsible Party
TUKWILA, WA 98188
US
Emergency Phone: 206-575-0450
Info Phone: 206-575-0450
Cage: 09463
Contractor
Telephone: 206-575-0450
Cage: 09463
Ingredients
6.
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 31%
OSHA PEL 100 PPM;150 STEL
ACGIH TLV: 100 PPM;150 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
11.4.
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: 25%
ACGIH TLV: 260 PPM (MFR)
10.
CAS: 71-23-8
RTECS: UH8225000
Fraction By Weight: 2.3%
OSHA PEL 200 PPM;250 STEL
ACGIH TLV: 200 PPM;250 STEL,S
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF HIGH CONCENTRATIONS CAN
PRODUCE CENTRAL NERVOUS SYSTEM DEPRESSION. SKIN CONTACT CAN CAUSE
SEVERE IRRITATION, DEFATTING AND DERMATITIS. EYE CONTACT CAUSES
SEVERE IRRITATION, REDNESS, TEAR ING AND BLURRED VISION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:REPEATED EXPOSURE CAN CAUSE AN ALLERIC REACTION
WITH DEVELOPMENT OF OCCUPATIONAL ASTHMA. LONG TERM EXPOSURE TO LOW
VAPOR CONCENTRATIONS MAY CAUSE CHRONICALLY PROGRESSIVE PULMONARY
DISEASE. REPEATED SK IN CONTACT CAN RESULT IN SENSITIZATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF
NEEDED. EYE:FLUSH FOR AT LEAST 15 MINUTES WITH WATER AND CALL A
PHYSICIAN. SKIN:WASH WITH SOAP AND WATER, REMOVE CONTAMINATED
CLOTHING. INGEST :SEE A PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:67F,19.4C
Extinguishing Media:FOAM, "ALCOHOL" FOAM, CARBON DIOXIDE, DRY CHEMICAL
OR WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.COOL CONTRS W/WATER FOG TO PREV RUPTURE. BOILOVER MAY OCCUR WHEN
TEMP OF MATL APPROACHES BOILING (SUPDAT)
Unusual Fire/Explosion Hazard:SPILLS/LEAKS WILL READILY FORM FLAM MIX
AT TEMPS AT/ABOVE FLASH PT. IT IS UNLIKELY THAT THIS PROD WILL
EXPLODE DUE TO MECH IMPACT BUT FIRE/EXPLOS MAY (SUPDAT)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AND KEEP PEOPLE
AWAY. VENTILATE ENCLOSED SPACES. AVOID BREATHING VAPORS. RECOVER
FREE LIQUID THEN ADD ABSORBENT TO SPILL AREA. COLLECT FOR DISPOSAL
WITH NON-SPARKING TOO LS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AWAY FROM OXIDIZING MATERIAL IN
A COOL, DRY PLACE WITH ADEQUATE EXPLOSION PROOF VENTIALTION.
Other Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN FLAME. GROUND
EQUIPMENT TO PREVENT ACCUMULATION OF STATIC CHARGE. KEEP CONTAINERS
TIGHTLY SEALED.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR CANISTER
WITH MECHANICAL FILTER TO REMOVE SOLID AIRBORNE PARTICULATES AND
OVERSPRAY. USE NIOSH/MSHA APPROVED SCBA IN AREAS OF HIGH
CONCENTRATIONS.
Ventilation:EXPLOSION PROOF MECHANICAL EQUIPMENT CAPABLE OF KEEPING
CONCENTRATIONS BELOW TLV.
Protective Gloves:PLASTIC OR RUBBER GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:EYE BATH, FACE SHIELD AND SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLAT:75 +/- 1%. FIRE FIGHT PROC:POINT OF SOLV. DO NOT EXTING FLAME
AT LEAK BECAUSE POSS OF UNCONTROLLED EXPLOS REIGNIT EXISTS. CUT OFF
FUEL AND/OR ALLOW FIRE TO BURN OUT. EXTING SMALL RESIDUAL FIRE S
WITH CHEM POWDER/WATER SPRAY. COVER SPILLS W/FOAM. EXPLO HAZ:OCCUR
FROM STATIC ACCUMULATION AND DISCHARGE.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>205F,>96C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.956-1.03
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAME.
Hazardous Decomposition Products:IMCOMPLETE COMBUSTION MAY PRODUCE
CARBON MONOXIDE AND/OR CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.